Attaching The Grass Catcher; Adjusting The Cutting Height - MD MD300 Bedienungsanleitung

Attaching the Grass Catcher

1.
Assembling grass catcher. (See illustration 3-1/ 3-2)
2.
Lift the back cover of the mower.
3.
Hook the grass catcher bag into the lawn mower. (See illustration 4)
4.
Fold the back cover down again.
Illustration 3-1, MD300

Adjusting the cutting height

(See illustration 6-1, 6-2, 7)
1.
The cutting height can be adjusted in 3/ 5 steps with the cutting height adjustment.
2.
Pull the handle outwards slightly.
3.
Set the required cutting height.
4.
Release the lever again.
Illustration 6-1, MD300
Attaching the mulching plug
The mulching plug helps to curve the inside of the
mower deck for more efficient mulching. Install and
remove the mulching plug by raising the rear
discharge guard as shown. The mulching plug only
fits one way.
Note: Remove the mulching plug when using a
grass bag!
Illustration 3-2, MD400
Illustration 6-2, MD300
(See illustration 8)
22
Illustration 4
Illustration 7, MD400
Illustration 8