Hama DIR355BT Kurzanleitung Seite 7

1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching product parts carrying hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to
draw your attention to speci c hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
DIR355BT
• Hama " "
• Power supply unit
• Quick Guide
• Clip mount
• Screw mount
3. Safety Instructions
• The product is intended for private, non-commercial use
only.
• Do not use the product in areas in which electronic
products are not permitted.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• As with all electrical products, this device should be kept
out of the reach of children.
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits
speci ed in the technical data.
• Keep the packaging material out of the reach of children
due to the risk of suffocation.
• Dispose of packaging material immediately in
accordance with the locally applicable regulations.
• Do not modify the device in any way. Doing so voids the
warranty.
• Use the product only for the intended purpose.
• Do not use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
• Do not use the product in a damp environment and
avoid splashing water.
• Only use the article under moderate climatic conditions.
Risk of electric shock
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains cable are
damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to quali ed
experts.
4. Before First Use
Note
A detailed description of the
UNDOK app and all of its
functions can be found in our
UNDOK guide at:
www.hama.com - > 00054236, 00054237- > Downloads
Setting up a network connection
4.1 WLAN (wireless network)
• Ensure that the router is switched on, is functioning
correctly and that there is a connection to the internet.
• Activate the WLAN function of your router.
• Follow your router's operating instructions as regards the
correct functioning of the WLAN connection.
• Then proceed directly as described under section 5
‚Getting started'.
5. Getting Started
5.1 General Notes on Use
5.1.1 Switch On / Off / Standby
• Press [POWER] (1) to switch on the radio.
• Drücken Sie [POWER] (1), um das Radio auszuschalten
(Standby).
• To completely switch off the device, disconnect it from
the power supply.
5.1.2 Navigation and Control
• After pressing a shortcut button, navigate through the
menu items using.
• Select the individual menu items by turning [VOLUME/
ENTER/NAVIGATE] (16).
• Con rm the selection by pressing [VOLUME/ENTER/
NAVIGATE] (16).
3