Assembling The Stand - Listo 40FHD725 Bedienungsanleitung

Inserting the batteries in the remote control
Open the cover on the back of the remote control.
Put the batteries in the remote control, while observing the correct "+" and "-" polarities as
shown.
Put the cover back on.
Orientation of the remote control
Aim the remote control at the infrared sensor on the front of the TV at a 60° angle so that it can
receive the transmitted information.
The remote control has a range of 5 metres.
•
Make sure that there are no obstacles between the remote control and the infrared sensor
•
and that no sunlight or other light source is reflected on them.
The remote control works with two AAA LR03 1.5 V batteries. We recommend using only
•
alkaline batteries. Remove the batteries from the remote control if you are not going to use it
for a long time (more than one month).
Used batteries must be disposed of safely. Place them in specially designated collection bins
•
to protect the environment.
Cover a flat, stable surface with a soft cloth. Lay the appliance, face down, on the cloth.
Remove the stand from the packaging and attach it to the bottom of the appliance as shown in
the diagram opposite.

ASSEMBLING THE STAND

63 V.1.0