Listo 40FHD725 Bedienungsanleitung Seite 107

No signal or weak
signal in terms of
satellite reception.
The remote control
is not working.
The USB removable
media cannot be
read.
Recording
the recording didn't
occur.
The cable connections may be
loose. Moisture has got inside
the cables or connectors.
The satellite dish is not
pointed correctly at the cor-
rect satellite.
The satellite dish is too small,
or trees or buildings are in the
signal path. The signal is too
strong, the dish is oversized.
There are no batteries in
the remote control, or the
batteries are dead.
The format is not supported.
Not enough space on the
removable media.
107
Check the cable connections,
LNB and any other devices
connected between the LNB
head and the receiver.
Seek professional advice.
Re-adjust the satellite antenna
or seek professional advice.
Check that the batteries are
correctly inserted in the remote
control.
Check the batteries. If they are
dead, replace them.
Check that the formats used are
compatible with this appliance.
Unplug the removable device
and plug it back in. Format the
USB media, and try again.
Check the space available on the
USB media.
V.1.0