Maintenance And Cleaning; Accessories - Berner BHD-2/24 SDS+ Originalbetriebsanleitung

Action
Changing the chisel position
(Vario-Lock)
Changing the position of the
auxiliary handle
Adjusting the drilling depth X
Switching on and off and set-
ting the speed
Locking-on the On/Off switch
Releasing the On/Off switch

Maintenance and Cleaning

For safe and proper working, always keep the
machine and ventilation slots clean.
After-sales Service and Cus-
tomer Assistance
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for
Berner power tools.
In all correspondence and spare parts orders, please
always include the 6-digit order number given on the
nameplate of the machine.
1 619 929 L30 • 31.7.12
Figure
8
9
10
X
11
12
13

Accessories

Keyless Chuck 13 mm
SDS-plus quick change chuck
Disposal
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
Subject to change without notice.
Please observe
Article number
According to the European Guideline
2002/96/EC for Waste Electrical and
Electronic Equipment and its imple-
mentation into national right, power
tools that are no longer usable must be
collected separately and disposed of
in an environmentally correct manner.
Page
159
160
160
161
161
161
34115
34114
English | 15