Intended Use; Technical Data; Declaration Of Conformity; Delivery Scope - Berner BHD-2/24 SDS+ Originalbetriebsanleitung

Symbol Meaning
Releasing the On/Off switch
Low speed/impact rate
High speed/impact rate
Tool holder
Apply a light coat of grease to the
shank end of the application tool
P Rated power input
1
E Impact energy per stroke accord-
ing to EPTA-Procedure 05/2009
n No-load speed
0
Ø Drilling diameter, max.
Concrete
Steel
Wood
Brickwork
Core bit
Weight according to
EPTA-Procedure 01/2003
Protection class
L Sound power level
wA
L Sound pressure level
pA
a Vibration total value
h
K Uncertainty

Delivery Scope

Rotary hammer, auxiliary handle and depth stop.
Application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in
our accessories program.
1 619 929 L30 • 31.7.12

Intended Use

The machine is intended for hammer drilling in con-
crete, bricks and masonry, as well as for light chisel-
ling work. It is also suitable for drilling without impact
in wood, metal, ceramics and plastic, as well as for
screwdriving.

Technical Data

The technical data of the machine are listed in the ta-
ble on page 154.
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Declaration of Conformi-
ty
We declare under our sole responsibility that the
product described under "Technical Data" is in con-
formity with the following standards or standardization
documents: EN 60745 according to the provisions of
the directives 2011/65/EU, 2004/108/EC,
2006/42/EC.
Technical file (2006/42/EC) at:
Berner Trading Holding GmbH, Bernerstr. 6,
D-74653 Künzelsau
Armin Hess
Senior Vice President
31.07.2012, Berner Trading Holding GmbH, Bernerstraße 6,
D-74653 Künzelsau
Noise/Vibration Informa-
tion
The measured values of the machine are listed in the
table on page 154.
English | 13