Kathrein CAS 124 Bedienungsanleitung Seite 5

CAS 124 216236
Off set parabolic antenna
Features
■
Refl ector made of aluminium,
powder coated, colour: white, matt (similar to RAL 9002)
■
For use of Kathrein feed systems in compact (UAS 5xx) or
modular (EAS 124/126/128) housings
■
Multifeed reception possible (see application note ZAS 124C)
■
The following components are required:
(not included)
Feed system clamp ZAS 124C (BN 23710026) and
azimuth / elevation clamp ZAS 180 (BN 218661), consisting
of aluminium and stainless steel
■
Optional components available if not mounted on a mast:
Stub mast for CAS 124: ZSO 120 (BN 376214) or
ZSO 125 (BN 376215)
Wall support ZAS 128 (BN 23710001)
■
Optionally available as adjustment aid for aligning the
antenna: Azimuth fi ne tuning device for CAS 124:
ZAS 189 (BN 23710017)
■
Optionally available multifeed adapter plate:
ZAS 1218 (BN 204500011), for any satellite spacing
■
Optionally available heaters for CAS 124:
ESO 124 H (BN 237500003), ESO 124 HL (BN 237500005,
Performance-enhanced variant for exposed locations).
The feed system support ZAS 124C can be heated with ESO
126 (BN 26910036).
not included:
ZAS 180
ZAS 124C
UAS/EAS XXX
EAS XXX
* with EAS XXX
Windload (+/-)
*
max. 1441
5 / 4
Proper use (use for the intended purpose)
The parabolic antenna CAS 124 is intended exclusively for re-
ception of satellite signals.
The antenna may be fi tted only in conjunction with the azi-
muth / elevation clamp ZAS 180 (part no. 218661) and the sub
mast ZSO 120/ZSO 125 or the wall support ZAS 128. ZAS 180
and ZSO 120 or ZSO 125 and ZAS 128 are not included with the
parabolic antenna.
Make absolutely sure that the values for the maximum wind speed
listed in the Technical Data (on the last page) are complied with. If
this load is exceeded, parts could break away!
Do not use the parabolic antenna for purposes other
than those listed in this manual! Any use other than
that specifi ed above will invalidate the warranty or
guarantee.
In particular, never
• modify any of its components or
• fi t any components other than those expressly
intended by the manufacturer for use with the an-
tenna.
Breach of these rules may lead to the antenna no
longer being suffi ciently stable and safe!
max.243
Upper edge of
mast tube