Safety Instructions - Climax MAX Montageanleitung

This manual

Safety instructions

For installation and use, refer to
the enclosed document
"Climax: Safety instructions"
Prior to installation
Check of the contents
Check of the installation site
Repair of Venetian blind
Subject to technical changes
4
NÁVOD NA MONTÁŽ / MONTAGEANLEITUNG /
INSTALLATION INSTRUCTIONS / INSTRUCTIONS DE MONTAGE
Always use this manual and attached documents to install the
Venetian blinds. Procedures that are specific only to certain types of blinds
are described in more detail in the manual. Provide this manual to the
future user.
This symbol indicates danger.
The blind serves as protection against the sun. Unskilled changes or
modifications to blinds are prohibited! Store blinds protected from damage.
Installation can only be carried out by a specialist. Injury prevention
regulations must be taken into account. Secure the mounting site by
closing to provide enough space for mounting!
Any interference with the product (without consulting a specialist installer),
as well as disassembly and assembly, is not permissible for the safety and
functionality of the product. For chain/cord-operated Venetian blinds, it is
advisable to place the chain/cord out of the reach of children. In case of
drafts or other effects of wind, it is advisable to retract the blind, otherwise
there is a risk of damage!
Fasteners are included. Prepare the following for installation:
electric drill, drill ø 3 mm (plastic window) nebo ø 5.2 mm (wooden window)
+ Allen key 3 mm, cross screwdriver, scissors, ruler, pencil
• Remove the transport protection and protective wrappers at
the appropriate working step!
• For disposal of packaging material and the product itself, or its electronic
components, use the method and collection points designated for that
purpose.
• Check the contents of the box
• Immediately inform the supplier of any damage caused
during transport!
Never install damaged equipment!
• Do the dimensions in installation documents match the actual
installation site dimensions so that the installation can be performed?
• Is there enough space for the installation?
Inform your supplier if there are any discrepancies.
Repairs can only be carried out by a specialist company. Only spare parts
of SERVIS Climax a.s. can be used.
When moving parts are creaking and squeaking, we recommend
lubricating with a suitable lubricant.
www.climax.cz / www.servisclimax.eu