User Settings - REJS FUTURO WP-H01 Benutzerhandbuch

User settings

The user can choose to change the desk's default settings. In total there are 6 settings
that can be changed. These are numbered in the following order S-1 to S-6.
You can change the settings by pressing «M» for 5 seconds. Then select which setting
you want to change, using «↑» and «↓». Then press «M» again to select the selected
user setting. Select the desired setting and confirm it by pressing «M».
S1) CM or INCH
1. Press «M» for 5 seconds;
2. Then „S-01" flashes on the display;
3. Press «M» again;
4. Then use «↑» or «↓» to select 1 or 0; ( 0 = CM & 1 = INCH )
5. To save, press «M» again.
S2) Adjust anti-collision sensor sensitivity
0: means off, 1: is the least sensitive and 8: is the most sensitive.
S3) Sensitivity upstream anti-collision sensor
0: means off, 1: is the least sensitive and 8: is the most sensitive.
S4) Sensitivity downward anti-collision sensor
0: means off, 1: is the least sensitive and 8: is the most sensitive.
S5) Determine the minimum height display (standard 65 cm)
Select the minimum height that will be showed on the display.
S6) Determine automatic or manual operation of memory buttons
0: means manual placement (press and hold the button);
1: means automatic placement to the selected height.
Caution:
• This product must comply with the technical parameters (see label control box);
• Keep the product away from water and corrosion-resistant gas;
• Is there a problem with the product? Please contact the point of sale.