REJS FUTURO WP-H01 Benutzerhandbuch Seite 2

Memory posiotions
M
Handset instructions WP-H01
Operation of the desk
• Press «↑» to move the desk up;
• Press «↓» to move the desk down.
Setting the memory function
1. Move the desk up or down to the desired position;
2. Press «M» until the display flashes, then press «1» to save position 1;
3. Repeat the procedure to save the other positions. (4 memory positions in total)
The memory positions are not lost when the power is turned off.
Initialization of the system (reset)
1. Press and hold «↓» until the frame has reached the lowest position;
2. Then press and hold «↓» for 5 seconds until you hear a beep.
Lock minimum or maximum height
1. Place the desk at the desired minimum/maximum height;
• Locking the desk at a minimum height, lower than 97,5 cm.
• Locking the desk at a maximum height, higher than 97,5 cm.
2. Now lock this height by pressing «↑» and «↓» together for 5 seconds;
3. You can remove the lock by pressing and holding «↑» & «↓» together for 5 seconds.
Caution:
• This product must comply with the technical parameters (see label control box);
• Keep the product away from water and corrosion-resistant gas;
• Is there a problem with the product? Please contact the point of sale.
Display Down
Up
USB Port