Troubleshooting - Daikin FWP04 Installations Und Bedienungs

9

TROUBLESHOOTING

If the unit is not working properly, before calling a service engi-
neer carry out the checks indicated in the table below.
PROBLEM
No power supply
The unit fails to work The automatic safety cutout has tripped
The on/off switch is on
The air filter is dirty or clogged
An obstacle is obstructing the air intake or outlet
The unit provides insufficient cooling
Air is trapped inside the heat exchanger
or heating
There are open windows and/or doors
The minimum speed has been selected
The unit has not been installed with the correct inclination
The unit "leaks" water
The drainage outlet is clogged
If the problem cannot be solved, contact your dealer or the near-
est service centre.
CAUSE
Restore the power supply
Call a service centre for assistance
Start the unit by moving the switch to ON
Clean the air filter
Remove the obstacle
Call the installer for assistance
Close windows and/or doors
Select medium or maximum speed
Call the installer for assistance
Call the installer for assistance
SOLUTION
UT66002770
9