Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3
Connect the Producer IIIN cables
a.
Connect the power cord from
the Producer IIIN to a power
outlet.
b.
Connect a network cable from
the Producer IIIN to a network
connection.
Note: Connecting a
network cable is necessary
only if you plan to submit
orders over a network.
Power Cord
4
Connect a monitor, mouse, and keyboard (Optional)
If this system is not attached to a network,
you must connect a monitor, mouse, and
keyboard to the appropriate ports on the
back of the Producer IIIN.
If the system is on a network, the monitor,
mouse and keyboard are optional. You may
also use Remote Desktop Connection to
access the system.
5
Power on the Producer IIIN
a.
Press the power switch on the back of
the Producer IIIN.
Power Switch
b.
Press the control center power
button on the front of the Producer
IIIN.
Control Center Power Button
The system powers on and the autoloader and printer begin the
initialization process.
Note: Initialization may take up to 5 minutes.
2001164_E
Copyright © 2009 Rimage Corporation
6
Log on
Note: If the system is connected to a network, access is made through
Microsoft Remote Desktop Connection running on a separate PC. See the
Rimage Advanced Setup (Networking) Guide for information on accessing
Remote Desktop Connection.
-
Important! If you are accessing the system remotely, you must wait to log on
until the system initialization completes. This may take several minutes. The
Media Bin, Retransfer and Ribbon statuses display repeatedly on the system
operator panel when the system is finished initializing.
Log on to the Producer IIIN with the following information:
Network Cable
Computer: RimageSystem (Remote Desktop access only)
User name: User
Password: password1! (case sensitive)
Note: In Windows XP, the User name is Administrator and the Password is
password.
Domain: Leave blank (Remote Desktop access only)
7
Install the printer driver (Everest only)
The printer driver installs automatically.
Note: If the New Hardware Wizard displays, follow the prompts to complete
the Wizard and install the Everest printer.
Monitor, Mouse, and
Keyboard Ports
8
Change the computer name
a.
Access the system through Remote Desktop Connection.
b.
In Windows select: Start > right-click Computer > Properties > Remote
Settings.
i.
ii.
iii.
c.
Restart the Producer IIIN.
Note: In Windows XP: select Start > right-click My Computer >
Properties.
Select the Computer Name tab.
Select Change. The Computer Name Changes window opens.
1.
Enter a unique name in the Computer name field.
Notes:
•
The name can be up to 15 characters long.
•
If adding the embedded system to a domain, do not enter
a Workgroup. Instead, refer to the Rimage Advanced
(Networking) Setup Guide.
2.
Select OK.
Select Apply.
Note: Be sure to use the new computer name next time you access this
Producer IIIN through Remote Desktop Connection.
9
Test and verify
Use QuickDisc to run a 3-disc test job to verify that the system is operating
correctly. Refer to the Getting Started with Rimage Software document.
Note: If the disc is not centered on the printer tray, or there are clamping
errors, refer to the Align the Printer instructions found in the Rimage
Producer III and Producer IIIN User Guide.
10
Learn more
•
For information about submitting orders to the Producer IIIN across a
network, or to view the latest information on remote accessing, refer to
the Advanced Setup (Networking) Guide.
•
For information about operating and maintaining the Producer IIIN, refer
to the Rimage Producer III and IIIN User Guide.
•
For additional support and product information, go to
www.rimage.com/support.
Page 2
Werbung
