Werbung
Verfügbare Sprachen
Verfügbare Sprachen
24161 Universal speaker wall mount
Compact, adjustable direction and angle, max. load: 15 kg, for vertical & horizontal speaker hole pattern
Instruction Manual
1. Equipment
Speaker holder
(vertical)
with wall plate
Speaker holder
adaptor plate
(horizontal)
Decorative
wall plate
3. Wall mount preparation
3.a
Determine wall fastening
3.a.1 Provided screw/dowel set is suitable for:
concrete, full brick, perforated brick & drywall
3.a.2 For other walls like wood, adobe etc. use adequate anchors
3.b.2
Adjust wall plate vertically and mark drilling holes (two options):
3.b.1 Two-hole-pattern
2. Separate speaker holder
2.
from wall plate
2.b
Loosen
lower bolted
assembly
2.a
Remove speaker holder
from wall plate
3.c Drill anchor holes for two or
3.c
three hole pattern: - dia. 8 mm
3.b.2 Three-hole-pattern
3.d Blow out holes and
3.d
place anchors
2x (see Fig.3.b.1)
3x (see Fig.3.b.2)
4. Wall mount fastening
4.a
Adjust decorative plate according to the drilled two-or-three-hole-pattern
4.a.1 Two-hole-pattern
4.b
Screw the wall plate along with the decorative plate to the wall. Use two
or three screws depending on the prepared hole pattern.
e.g.: 2x
4.a.2 Three-hole-pattern
e.g.: 3x
Werbung
