AFLAMO ROYAL Serie Benutzerhandbuch Seite 12

HEATER button: Turns heater on and off.
NOTE: The heater only works when the
flame effect is on. If the flame effect is off,
the heater will not turn on.
NOTE: To prevent overheating, the heater
HEATER
blows cool air for 10 seconds before the
heater turns on, and after it turns off.
TIMER SETTINGS ON REMOTE CONTROL
: Timer: Displays current day, time, and week.
Press to enter or confirm timer settings.
: Settings: Press to move to next step (use with Timer button).
Press to confirm week timer.
: Back: Press to clear timer settings. Press to return to the
previous step (use with Settings button).
:Up and Down (use with Settings button).
LCD Screen
Weekday
Mon, Tues, Wed, Thurs, Fri, Sat, Sun
Time Display
Current Time / Timer From 00: 00 to 24
NOTE: 00-12:00 is AM / 13:00-24:00 is PM
TEMPERATURE button: Turns heater on
and off.
NOTE: Press & Hold the button for 5 seconds,
the temperature setting will switch from ℃ to ℉.
Same way from ℉ to ℃。
TEMP
1. Press once. Indicator lights up.
Fan blows cool air for 10 seconds. Low
heater turns on and blows warm air.
Press again. Indicator lights up.
2.
High heater turns on and blows hot air.
3. Press again. Heaters turn off.
The fan blows cool air, then turns off.
1. Press once: Indicator lights up.
Temperature goes to 18
2. Press again: until desired setting is
Reached. Digital display shows setting
circles as below:
www.aflamo.com
Note: The functions can
only be adjusted when the
related letters or digits are
flashing.
Note：Calibrate the timer
to current time before the
weekly settings.
℃
12