AFLAMO ROYAL Serie Benutzerhandbuch Seite 10

Flame speed button:Controls the speed
of the flame.There are 3 flame speed
settings: 01 (slowest), 02 (Medium), 03
(fastest).
SPEED
Flame color button: Makes the color
flame effect changing.
NOTE: color effect stays on until power
button is turned off. Color flame effect
FLAME
must be on for heater to turn on.
COLOR NOTE: this fireplace is with memory
function for flame.
LED Ember light button: Makes the
color on bottom effect gets changing.
NOTE: Ember color effect stays on until
power button is turned off.
NOTE: this fireplace is with memory
EMBER
function for LED ember lights.
LIGHTS
LED Ember light brightness button:
Makes the LED ember lights on bottom
effect gets changing.
NOTE: LED Ember light brightness effect
stays on until power button is turned off.
EMBER
BRIGHTNESS
1. Press once. Flame speed gets changing.
2. Press again until desired setting is
reached. Display shows the setting.
The Default setting is 02 (medium speed)
1. Press once. Flame color effect gets
changing.
2. Press again until desired setting is
reached. In total 6 colors for flame.
1. Press once. LED ember light color effect
gets changing.
2. Press again until desired setting is
reached. In total 10 colors for flame.
3. Auto-cycle function: When pressing with
the 11
auto-cycling (NOTE: It will take 15
seconds to switch between colors.)
1. Press once. LED ember light color effect
gets changing.
2. Press again until desired setting is
reached. In total 5 levels.
From L1 - L2 - L3 - L4 - L5
www.aflamo.com
time, the LED ember light will do
th
10