Start-Up - P.Lindberg 9063777 Original Bedienungsanleitung

Start-up

Fill the tank with petrol mixed with 2-
stroke oil.
Place the machine on a level surface.
Keep the cutter head above the
ground and free of surrounding
objects, as it will begin to rotate as
soon as the engine starts.
Press the pump primer three or four
times until you see fuel transferred
into the transparent hose.
Move the choke to the active position.
Set the start/stop switch (a) to the "I"
position. Set the throttle to the start
position (half throttle). Activate the
safety pin (1) so that the throttle
trigger (2) can be pressed and locked
at half-throttle using the locking
button (3).
While holding the machine securely,
quickly pull the starter cord.
P. Lindberg A/S
Tel.: +45 70212626
17
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9063777 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk