Thermostat Installation; Warranty - Comfort Heat CTAV-10 Installationsanleitung

8. THERmOsTAT INsTALLATION

• Let adhesive to dry, once more check the resistance of heating cable and its insulation,
connect the heating cable to the thermostat. Now the heating can be switched on.
• The devices for full disconnection, according to the requirements of III
overpower, must be included into standard installation.
ATTENTION! In case heating cable is damaged, repair must be done by approved
specialist. Cable should be repaired by connecting it with special joint.

9. WARRANTY

Warranty period for heating cables is 20 years. Warranty is valid if following documents
are presented:
1. Warranty coupon (filled correctly);
2. Document of purchase: invoice or receipt;
3. The obligation of Comfort Heat will be to repair or supply a new unit, free of charge to the
customer, without secondary charges linked to repairing the unit.
The Comfort Heat warranty does not cover installation made by unauthorised electricians,
or faults caused by incorrect designs supplied by others, misuse, damage caused by others, or
incorrect installation or any subsequent damage that may occur. If Comfort Heat is required to
inspect or repair any defects caused by any of the above, then all work will be fully chargeable.
The Comfort Heat warranty is void, if payment of the equipment is in default.
category of
rd
7