Transportation And Storage - Husqvarna QC330 Bedienungsanweisung

2. Connect the battery to the battery charger. The charging
LED comes on.
3. Remove the battery from the battery charger when it is
fully charged. Push the battery indicator button for
battery status. When all the LED indicators come on, the
battery is fully charged.
TROUBLESHOOTING
Condition
The charging LED flash-
es green.
The charging LED is red.
The charging LED flash-
es red.

TRANSPORTATION AND STORAGE

• Safely attach the product during transportation to
prevent damage and accidents.
1403 - 004 -
Possible faults
Temperature deviation,
the battery is too cold or
too hot to use or charge.
Permanent battery charg-
er error.
Defective battery.
4. Pull the power plug to disconnect the battery charger
from the power outlet. Do not pull the power cord.
Possible procedure
Let the battery cool down or warm it up. When the battery has the
correct temperature, it can be used or charged again. Use the bat-
tery charger in ambient temperatures between 5 °C (41 °F) and
40 °C (104 °F).
Speak to your dealer.
Speak to your dealer.
• Keep the product in a locked area to prevent access for
children or persons that are not approved.
• Put the product in a dry, frost-free and clean space with
correct temperature.
9