Product Description And Specifications; Charging Process - Husqvarna P4A 18-C70 Betriebsanleitung

its place by an authorised custo-
mer service agent. The replace-
ment plug should have the same
fuse rating as the original plug.
The severed plug must be
disposed of to avoid a possible
shock hazard and should never
be inserted into a mains socket
elsewhere.
Product description
and specifications
Intended use
The battery charger is intended
for charging the rechargeable
18V POWER FOR ALL system
batteries.
Product Features
(1) Red temperature
monitoring/ error indicator
(2) Green battery charge
indicator
(3) Charging slot
Technical Data
Battery charger
Protection class
Charging current
Battery carging
voltage (automatic
voltage detection)
Weight according to
EPTA-Procedure
01:2014
A) Depends on temperature and
rechargeable battery type

Charging process

u Pay attention to the mains
voltage. The voltage of the
power source must match the
voltage specified on the rating
plate of the charger.
Ensure that the charging
bay (3) and the battery
contacts are free of
coarse dirt. Ensure that the
battery is fully inserted.
The charging process begins as
soon as the mains plug for the
charger is inserted into the mains
socket and the battery is inserted
into the charging bay (3).
| 7
English
P4A 18-
C70
/ II
3,0 A
A)
14,4–18 V
0,40 kg