Husqvarna QC330 Bedienungsanweisung Seite 6

The batteries are software
encrypted.
• Do not use non-rechargeable
batteries.
• Do not try to disassemble or
repair the battery charger.
• Do not connect the battery
charger terminals to metal
objects.
• The charger is using a C17
standard sheet cord set.
• Use an approved grounded
mains socket that is not
damaged.
• Regularly examine that the
power cord is not damaged.
6
Immediately disconnect the
battery charger if the power
cord is damaged.
• If the power cord is damaged,
let an approved service agent
replace the power cord.
• Do not lift the battery charger by
the power cord. To disconnect
the battery charger from a
mains socket, pull out the power
plug. Do not pull the power
cord.
• Keep all cables and extension
leads away from water, oil and
sharp edges. Make sure that
the power cord is not caught
1403 - 004 -