Troubleshooting; Transportation, Storage And Disposal; Technical Data - Husqvarna PS 300C Bedienungsanweisung

Troubleshooting

Symptoms
The battery does not charge.
Transportation and storage
• Safely attach the battery charger during
transportation to prevent damage and accidents.
• Keep the battery charger away from metal objects,
for example nails, screws or jewelry.
• Keep the battery charger in a locked area to prevent
access for children or persons that are not approved.
• Put the battery charger in a dry, frost-free and clean
area. The ambient temperature must be between 0
°C / 32 °F and 50 °C / 122 °F.
• Keep the battery charger away from sunlight.
• Clean the battery charger before storage.

TECHNICAL DATA

Battery charger
Output Voltage, VDC
Number of batteries that can be charged at the same
time
6
Troubleshooting
Cause
The battery charger is not correctly
connected to the mains outlet.
The power cord is not correctly con-
nected to the battery charger.
The charger ON/OFF switch is set to
OFF.
The battery charger is not correctly
connected to the product.
The battery is damaged.
The battery charger or the power
cord is damaged.

Transportation, storage and disposal

Technical data
Solution
Connect the battery charger to a
mains outlet.
Connect the power cord to the bat-
tery charger.
Set the charger ON/OFF switch to
ON.
Connect the battery charger to the
product.
Disconnect the battery charger and
speak to an approved servicing deal-
er.
Disconnect the battery charger and
speak to an approved servicing deal-
er.
• Disconnect the battery charger before storage.
Disposal
Husqvarna battery chargers are not domestic waste.
Obey the disposal instructions.
• Obey the local disposal requirements and applicable
regulations.
• Recycle the battery charger and package at an
applicable disposal location.
• Speak to your local Husqvarna dealer for more
information on how to recycle and discard the battery
charger.
PS 300C
58
1–3
2011 - 001 - 11.04.2023