Battery Controller BC X-PRO 60 Benutzerhandbuch Seite 22

TROUBLESHOOTING – BATTERY CHARGER OPERATING MODE
ANOMALIE CAUSE RIMEDI
1. The display shows the error message: "Load not connected"
No battery is connected to the device -> Check battery connection
2. The display shows the error message: "Short/Pol. Inverted"
Battery connected with reverse polarity -> Connect the red terminal to the battery positive pole (+)
and the black terminal to the battery negative pole (-)
Short circuited battery -> Replace battery
Short circuit on the output of BC X-PRO 60 -> Please ask the manufacturer or an authorized service
center for support
3. The display shows the error message: "Mains not connected"
BC XPRO 60 not connected to power supply -> Connect the device to the mains and turn it on by
putting the switcher in "I" position.
4. The display shows the error message: "Weak battery"
The Battery Check step detected that the battery is not able to retain the charge -> Replace the
battery
5. The display shows the error message: "Psu internal error"
Internal problem inside BC X-PRO 60 -> Please ask the manufacturer or an authorized service center
for support