Basic Operation - Ayce COLONIA S743 Gebrauchsanweisung

IV. BASIC OPERATION
1. Time and Calendar setting：
Under any mode, press and hold SET button to enter to time,
calendar and alarm setting, in sequence: 12/24 hour → hour →
minute → year → month → date → C/F→ alarm hour →alarm
minute → quit.
During the setting process, the digit blinks.
When setting, press "UP" once, setting value increased; Press
"DOWN" once, setting value decreased.
Press SET button or without any operation within 15 seconds to
confirm the setting to go back to the common display.
2. Alarm setting
Under alarm mode, press DOWN button to turn ON/OFF alarm, the
alarm symbol
During alarming, press any button to enter to snooze status with an
interval of 5 minutes and press any other key to exit.
3. Indoor temperature:
After start-up the clock will measure the current temperature
automatically, working range: 0°C to 50°C.
Indoor temperature, scope 0°C--50°C, testing period 30 seconds.
When temperature lower than 0°C, display LL, higher than 50°C,
display HH.
4.
Outdoor temperature:
After start-up the sensor will measure the current temperature
automatically, working range: -30°C to 60°C.
When temperature lower than -30°C, display LL, higher than 60°C,
display HH. (-30°C~-0.1°C accuracy ±2°C, 0°C-60°C accuracy ±1°C)
Under common mode, press and hold UP button, to clean outdoor
temperature data and register new data for 3 minutes.
5.
MAX/MIN record of temperature
History record of MAX/MIN temperature value.
Under common mode, press UP button to view MAX/MIN tempera-
ture record, in sequence: MAX temperature record→ MIN tempera-
ture record → current temperature.
Under MAX/MIN mode, without any operation within 3 seconds back
to current temperature.
6. Brightness adjust
Under common mode, press DOWN button to select brightness
level, in sequence:
Operated by AC adapter, High level → Middle level → off.
Operated by battery, High level → Middle level.
appearance.
GB