Assembling The Seat - RECARO EXO Bedienungsanleitung

2.2 Assembling the seat

1. Insert the five castors, one after the
other, into their respective mounts in the
base. The castors will snap into place.
[4]
2. Insert the black-painted end of the gas
spring from above into the opening in
the centre of the base. [5]
3. Put the upper end of the gas spring into
the mechanics module. Then tilt the
complete seat back into an upright posi-
tion and place it on the castors. [6]
4. Check the gas spring function by using
the seat height adjuster. To snap the
gas spring into place for the first time,
higher effort is required. Your seat is now
assembled and ready to use. [7]
4
5
6
7
17