Tidying Cables - LG 55EG9609-ZA Benutzerhandbuch

5
Stand
cover
Cover holder
CAUTION
y Insert the Cover Holder of the Stand Cover into the
holes until it clicks.
NOTE
y Remove the stand before installing the TV on a
wall mount by performing the stand attachment in
reverse.
CAUTION
y When attaching the stand to the TV set, place the
screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
y Make sure that the screws are inserted correctly
and fastened securely. (If they are not fastened
securely enough, the TV may tilt forward after being
installed.)
Do not use too much force and over tighten the
screws; otherwise screw may be damaged and not
tighten correctly.
SETTING UP THE TV

Tidying cables

Image shown may differ from your TV.
Gather and bind the cables with the cable holder.
Cable holder
CAUTION
y Do not move the TV by holding the cable holder,
as the cable holder may break, and injuries and
damage to the TV may occur.
A-7