Viewing The Connections - Schaub Lorenz 22LE-5900 Bedienungsanleitung

Viewing the Connections

Connector
SIDE AV
SIDE AV
HEADPHONE
NOTE: When connecting a device via the Side AV input, you must use the supplied connection cables to enable connection.
See the illustrations above. | YPbPr can be used only when you connect a device that has a YPbPr output through the PC
input with YPbPr to PC cable (YPbPr to PC cable is not supplied). When the connection is made, switch to YPbPr source.
To enable PC audio, you will need to use PC/YPBPR AUDIO CONNECTION WHITE & RED inputs. | If an external device is
connected via the SCART socket, the TV will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 H.264)
or while in Media Browser mode, output will not be available via the scart socket. | When using the wall mounting kit (optional),
we recommend that you plug all your cables into the back of the TV before mounting on the wall. | Insert or remove the CI
module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings.
Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the TV. The module
should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the
CAM is forcefully inserted.Each USB input of your TV supports devices up to 500mA. Connecting devices that have current
value above 500mA may damage your TV.
Type
Scart
Connection
(back)
VGA
Connection
(back)
PC/YPbPr
Audio
Connection
Side Audio/Video
(side)
Connection Cable
(Supplied)
HDMI
Connection
(back)
SPDIFF
Connection
(back)
Side AV
Connection
AV Connection Cable
(side)
(supplied)
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
English - 41 -
Cables
PC Audio Cable
(Not supplied)
Device