Operation - Klarstein SKYSCRAPER HEAT Handbuch

EN
22

OPERATION

Operating panel
Bottom power switch
1. Press Power switch which is in the back of the device, the device enters into
energized state, and the heater is ready to use with a Bi sound, now all the
functions and displays are off.
2. In energized state, all the pressing are invalid except
the device starts working. Press it again, the device enters into standby mode.
There are following situation when in working condition.
During operation the following functions are available:
Shift between low power (1600 W) and high power (2500 W). Operated at
low heating power: low heating power indicator
heating power: Middle heating power
In working condition, press this key to make the device swing or not. Press
Swing: the device will oscillate, and the indicator will be on. Press Swing
again: the swing function turns off, and the indicator will be off.
Operating panel schematic diagram on top
on.
key. Press key,
on. Operated at high