VOLTCRAFT VPC-3 Bedienungsanleitung Seite 2

Operating instructions
USB car charger VPC-3
Item no. 1666487
Intended use
The product is designed for charging and operating USB devices (e.g., smartphones and tablet PCs) in
motor vehicles. The power supply is provided by a car power socket. The product has two USB-A outputs and
one USB-C output. The USB car charger is protected against short circuit and overload.
TM
Use is only permitted inside the car, not outside. Contact with moisture must be avoided at all costs.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. In addition, improper use can cause
hazards such as a short circuit, fire or electric shock. Read the instructions carefully and store them in a safe
place. Only make this product available to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and product names are
trademarks of their respective owners. All rights reserved.
Delivery content
• Car-USB-charger
• Operating instructions
Up-to-date operating instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or scan the QR code shown.
Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to
an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the product.
Safety instructions
Read the operating instructions carefully and observe safety instructions. If you do not
follow the safety information and information on proper handling in these operating
instructions, we will assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe the safety information and operating instructions of any other devices which
are connected to the product.
• Always turn off the connected load before connecting and disconnecting.
• Unplug the product while it is not in use.
• Do not short-circuit the USB outputs.
• Never leave the product unattended during use.
• The housing warms up during use. Ensure that there is sufficient ventilation. Do not cover
the housing!
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation that forms might destroy the product. Furthermore, this could cause
a lethal electric shock! Allow the product to reach room temperature before connecting it and
putting it to use. This may take several hours.
• Consult a technician if you are not sure how to use or connect the product, or if you have
concerns about safety.
• Maintenance, modifications and repairs may only be carried out by a technician or a specialist
repair centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Product overview
1 USB-A output (2 x)
2 LED operation lamp 3
2
3 USB-C output
TM
4 Car dashboard plug
1
Operation
Always turn off the USB device to be connected before connecting it to a USB port. Make sure
the connection is correct. If the product is not connected properly, it could heat up or cause an
electric shock or fire.
Make sure that your USB device is suitable for the connection values of the USB car charger.
Observe the information in chapter "Technical data".
• Plug the car dashboard plug (4) into the car's power socket in your car. The LED operation lamp (2) lights
up to indicate that the product is ready for use.
• Connect a powered-off USB device to a USB-A port (1) or the USB-C
three USB devices at the same time. A total of 3 A are available.
• The connected USB device is charging. If you want to use the USB device, you can turn it on.
• Turn off the connected USB device before disconnecting it from the USB port or before disconnecting the
USB car charger from the car's power socket.
• Disconnect all connected USB devices from the USB charger after use. Disconnect the USB charger from
the car power socket after use. The LED operation lamp goes out after a few seconds.
You can use the USB car charger with the engine running or with the engine off. However, you
should not start the engine when the USB car charger is plugged in, as the car power socket is
interrupted at start-up (this may not apply to all car models). Current consumption for a long time
with the vehicle engine off results in a discharge of the vehicle battery.
Care and cleaning
• Disconnect the USB car charger from the car power socket and connected devices before cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the
casing or cause the product to malfunction.
• Do not emerge the product in water or any liquids.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At
the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Input voltage/current ............................. 12 - 24 V/DC
Output voltage/current .......................... 5 V/DC, max. 3 A total, max. 3 A per USB output
Output power ........................................ max. 15 W
USB outputs ......................................... 2 x USB-A, 1 x USB-C
Operating conditions ............................. 0 to +40 ºC, 20 - 85 % RH
Storage conditions ................................ -20 to +60 ºC, 10 - 90 % RH
Dimensions (L x W x H) ........................ 69 x 38 x 29 mm
Weight .................................................. approx. 27 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication represents the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
4
port (3). The product can charge
TM
TM
*1666487_v1_1018_02_hk_m_en