Digital Set-Up Menu - Sony KDF-50E2000 Bedienungsanleitung

Digital Set-up menu

Set Up
Auto Start Up
Language
Country
Auto Tuning
Programme Sorting
AV Preset
Sound Offset
Manual Programme Preset
Digital Set Up
Back: Select:
Digital Tuning
28
GB
English
-
Exit:
Enter:
MENU
Displays the "Digital Tuning" menu.
Digital Auto Tuning
Tunes in all the available digital channels.
Usually you do not need to do this operation because the channels are already tuned
when the TV was first installed (page 5). However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new channels
that have been launched by broadcasters).
Programme List Edit
Removes any unwanted digital channels stored on the TV, and changes the order of
the digital channels stored on the TV.
1
F f
Press / to select the channel you want to remove or move to a new
position.
If you know the programme number (frequency)
Press the number buttons to enter the three-digit programme number of the broadcast
you want.
2
Remove or change the order of the digital channels as follows:
To remove the digital channel
Press . A message that confirms whether the selected digital channel is to be
deleted appears. Press
To change the order of the digital channels
g F
Press , then press
Repeat the procedure in steps 1 and 2 to move other channels if required.
3
Press RETURN.
Digital Manual Tuning
Tunes the digital channels manually.
1
Press the number button to select the channel number you want to
manually tune, then press
2
When the available channels are found, press
you want to store, then press
3
F f
Press / to select the programme number where you want to store the
new channel, then press
Repeat the procedure above to tune other channels manually.
You can change/set the digital settings using the
Digital Set-up menu. To select options in
"Settings", see "Navigating through menus"
(page 19).
G
to select "Yes", then press
f
/ to select the new position for the channel and press
F f
/ to tune the channel.
.
.
.
G
F f
/ to select the channel
.