Configuring The Lock Menu - ChiQ LED40E5000ISN Handbuch

Menu Operation
– USB Upgrade: Update the software using the USB memory device. Please be
careful not to disconnect the power or remove the USB drive until updates are
complete.
– Internet Upgrade Check: To use network upgrade, you must have configured your
TV to connect to your network and the TV must be connected to the Internet.
– Software Version: Display current software version information.
■ Country: Press ▲/▼ buttons to select the country you want to.
■ HDMI_CEC: Press the OK /►button to enter the submenu. The HDMI_CEC system
can be used only with devices that have the HDMI_CEC feature. You must connect
an HDMI_CEC device using an HDMI cable. Some HDMI cables may not support
HDMI_CEC functions.
– HDMI_CEC: Switch the HDMI_CEC function On or Off.
– Auto Standby: Switch the Auto Standby function On or Off.
– ARC: Switch the ARC function On or Off.
– Auto Power on: Switch the Auto Power on function On or Off.
■ App Settings: Display information about the Netflix.
■ Restore Factory Default: Restore the system settings to the factory default. When
the restore is complete, the TV will enter standby mode.
■ HBBTV: Switch the HBBTV function On or Off.
NOTE:
 This service may be supported in other countries.
 Some broadcasting may not support the HBBTV.
 An application on HBBTV may malfunction temporarily depending on the
circumstances of the broadcast station or application provider.
 An application is only available for use on HBBTV when the TV network is
connected to an external network. The application may malfunction depending on
the network conditions.
■ Installation Guide: This is an installation guide to help you to setup the TV.
■ End-User License Agreement: Read and accept/decline the EULA.

Configuring the Lock Menu

Menu
Lock
Channel
Picture
Lock System
Sound
Set Password
Network
Block Programme
Option
Parent Lock
Lock
Timer
No block
25