Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Clearing the Pairing List
Starting with the earbuds in the case:
1.
Take both earbuds out of the charging case, and the earbuds will turn on.
Touch and hold on the touch-sensitive panels on both earbuds for 6 seconds
to turn them back off
Touch and hold on the touch-sensitive panels on both earbuds for 10 seconds.
2.
The earbuds will turn on, clear their pairing list, and turn off again
3.
Put both earbuds back in the charging case and close the lid to reset
4.
Open the lid and take both out again, and both earbuds will turn on and enter
pairing mode
Notes
●
When you turn on the earbuds, they will automatically reconnect to the
last-paired device or enter pairing mode if no paired device is found
●
In pairing mode, the earbuds will automatically turn off after 5 minutes if
no devices are paired
●
If one of the earbuds has no sound output, put both earbuds back in the
charging case and take them out again
●
The maximum wireless operating range is 10m (33ft). If you exceed this
range, the earbuds will disconnect from your paired device. The connection
will be re-established if you re-enter the wireless range within 5 minutes
- 07 -
Werbung
Inhaltsverzeichnis
