Walter LT63006S Bedienungsanleitung Seite 49

- Press the spindle lock button (14)
and turn the blade until it locks in
place.
- Open the flange screw (a) using the
supplied hex key. The spindle lock
button should remain pressed while
opening the flange screw.
- Remove the outer flange and the
saw blade.
- Mount the new saw blade.
- Replace the flange screw.
- Tighten the flange screw (a). The
spindle lock button should remain
pressed while tightening the flange
screw.
- Press the locking pin again to return
the saw to its normal position.
630355_Anleitung_D,GB,FR.indb 49
49
14
a
11
11.12.15 11:07