Vibration Level - Walter LT63006S Bedienungsanleitung

Technical data model LT63006S
Mains voltage:
Rated power
No load speed:
Mitre angle:
Cutting depth:
Plunge saw blade
Noise emission levels:
Measured according to 60745-1 The noise level at the workplace may exceed 85 dB
(A); safety precautions are required for the operator in this case (wear suitable hearing
protection device).
Sound pressure level 88.53 dB(A)
Sound power level L wA 99.53 dB(A)
Measurement uncertainty K 3 dB(A)
The declared values are noise emission values and do not necessarily reflect safe noise
levels at the workplace. The correlation of emission values and exposure levels can not
reliably indicate whether additional precautionary measures are required.
Factors, which can affect the actual noise level at the workplace include, amongst
others: The size and shape of and the conditions in and around your workplace; the
length of exposure; and other sources of noise.
Please also consider any applicable national regulations on permitted noise exposure
levels at the workplace. The information printed above may however allow the
operator to make a better assessment of risk.

Vibration level:

Handle: a 2.713 m/s
h
Auxiliary handle: a
Uncertainty K 1.5 m/s
CAUTION:
The declared vibration level has been measured in accordance with a standard test
method (DIN EN 60745-1) and may be used for comparing one tool with another. This
total may also be used in a preliminary assessment of exposure to vibration.
The vibration emission during actual use of the tool can differ from the declared
vibration level depending on the ways in which the tool is used, for example:
- Is the tool well-maintained and in good condition
- How, and on what material, the tool is used
- The use of correct accessories, and whether these are in good condition
630355_Anleitung_D,GB,FR.indb 38
230-240 V~ / 50 Hz
1200 W
5500 min
0° – 48°
at 90°: 55 mm
Cutting depth at 45°: 42 mm
165 x 2.2 x 20 mm, 24 teeth
Protection category II
2
5.838 m/s 2
h
2
-1
38
11.12.15 11:06