paco MEC Serie Montage- Und Bedienungsanleitung Seite 69

Data sheet - MEC 2405 / MEC 2410
24V
ChargerType
Input Voltage
Input Power
Output Voltage
Output Current
Min. Starting voltage
Back Drain
Current Power
Desulfatation
Soft Start
Main charge (Bulk)
Absorption
Battery Test (Analysis)
Repair (Reconditioning)
Preservation Charge (Float)
Maintenance Charge
(Pulse)
Performance Efficiency
Thermal Protection
Cooling Fan
Ambient Temperature
Over Votlage Protection
(Surge)
Deep Cycle
Battery Types
Dimensions (LxWxH)
Weight
Paco
MEC 2405
296 W
24 V DC
5 A
8 V
8 mA
250 V AC, T3.15 A
Charge Control
5 A up to:
28.2 V (GEL)
28.8 V (AGM)
29.4 V (WET)
29.4 V (CALCIUM)
Constant voltage until the current drops to 0.75 A
Monitors the voltage for 90 seconds
Continuous current (0.75 A) for 30 minutes or for 4
hours limited to:
28.2 V (GEL)
28.8 V (AGM)
32 V (WET)
32 V (CA)
25.2 V - 28.2 V, 5-2 A (GEL)
25.2 V - 28.8 V, 5-2 A (AGM)
25.2 V - 29.4 V, 5-2 A (WET)
25.2 V - 29.4 V, 5-2 A (CA)
Automatically temperature controlled
-20 °C to +50 °C, the output power is automatically reduced at too high temperatures.
Automatic protection function that turns off the device at a voltage of more than 35 V.
Battery Range
35 - 100 Ah
All 24V lead-acid batteries - including Calcium, WET, Gel, AGM and non-woven batteries
197 x 116 x 62 mm
1,1 kg
Paco MEC Series
MEC 2410
8-stage automatic
220 - 240 V, 50/60 Hz
250 V AC, T3.15 A
Pulse-charge up to 22 V
50% of rated current up to 25 V
10 A up to:
28.2 V (GEL)
28.8 V (AGM)
29.4 V (WET)
29.4 V (CALCIUM)
Constant voltage until the current drops to
1.5 A
Continuous current (1.5 A) for 30 minutes or for 4
hours limited to:
28.2 V (GEL)
28.8 V (AGM)
32 V (WET)
32 V (CA)
27,4 V - also with pulse function
25.2 V - 28.2 V, 5-2 A (GEL)
25.2 V - 28.8 V, 5-2 A (AGM)
25.2 V - 29.4 V, 5-2 A (WET)
25.2 V - 29.4 V, 5-2 A (CA)
Approx. 85%
65 °C +/- 5 °C
217 x 116 x 62 mm
69
Paco
547 W
24 V DC
10 A
8 V
8 mA
70 - 200 Ah
1,28 kg