Error Codes - paco MEC Serie Montage- Und Bedienungsanleitung

Error codes

The Paco MEC charger displays error codes by lighting and flashing individual LEDs according
to the following scheme:
• = permanently luminous, ☼ = flashing, — = no light/blinking
Power
Error
Pole
confusion/
short-circuit
No
connection
to the
battery
Defective
battery
Overvoltage
Overheating
Status
Led Led
● —
● —
☼
●
● —
● —
Paco MEC Series
Error
Cause
Led
Short-circuit
Or
—
Confused
connection of
the terminals.
No connection
—
to the battery.
Main charge
interrupted and
●
stopped after 10
hours.
The 12V battery
voltage is above
17.5V.
●
The 24V battery
voltage is above
35V.
The internal
☼
temperature is
more than 65°C
(+/-5°C).
59
Solution
Make sure that
the clamps do
not touch each
other
OR
Check that the
clamps are
correctly
connected to
the battery.
Please choose
the correct
battery type for
a connection.
The battery is
defective and
needs to be
replaced.
Disconnect the
charger and
check the
battery voltage.
This charger is
only suitable for
12V or 24V
batteries.
Turn off the
charger and let
it cool down.