AFLAMO AV-WM33ALB/WH Bedienungsanleitung Seite 11

TIMER SETTINGS ON REMOTE CONTROL
: Timer: Displays current day, time, and week.
Press to enter or confirm timer settings.
: Settings: Press to move to next step (use with Timer button).
Press to confirm week timer.
: Back: Press to clear timer settings. Press to return to the
previous step (use with Settings button).
:Up and Down (use with Settings button).
LCD Screen
Weekday
Mon, Tues, Wed, Thurs, Fri, Sat, Sun
Time Display
Current Time / Timer From 00:00 to 24:00
NOTE: 00-12:00 is AM / 13:00-24:00 is PM
TEMPERATURE button: Turns heater on
and off.
NOTE: Press & Hold the button for 5 seconds,
the temperature setting will switch from ℃ to ℉.
Same way from ℉ to ℃。
TEMP
1 Set current day and time
1. Press once. When "MON" (Monday) begins flashing, use
2. Press . When the hour digits begin flashing, use
3. Press again. When the minute digits begin flashing, use
4. Press again. The current time is now set.
P 1. Press once: Indicator lights up.
Temperature goes to 18
2. Press again: until desired setting is
Reached. Digital display shows setting
circles as below:
to select the current day.
to select the current hour.
to select the current minute.
www.aflamo.pl/en/
Note: The functions can
only be adjusted when the
related letters or digits are
flashing.
Note：Calibrate the timer
to current time before the
weekly settings.
℃
11