Cleaning And Storage - Klarstein Skyscraper Frost Handbuch

CLEANING AND STORAGE

Cleaning of water tank
1. Unplug the power and remove water-filling valve.
2. Wipe the scale in the water tank by using a towel with little detergent, clean it with
clean water, and drain the sewage from the outlet.
Cleaning of body surface
1. Clean the body surface with a wet cloth, and prohibit directly flushing it.
2. Do not use corrosive detergent or solvent for cleaning.
3. When cleaning the body, please be sure to turn off the power switch and unplug
the power cord to avoid electric shock.
Installation and use after cleaning
1. Install water curtain cloth and rear grille properly in the sequence.
2. Connect the power supply and ensure normal operation of the machine.
3. If not operated properly, please confirm whether rear grille is installed properly.
Storage
1. When not using for a long time, unplug the power cord and pack the product to
avoid dust.
2. Make sure that water curtain cloth and filter screen are dry and there is no water in
the water tank before packaging.
3. Store in a dry and ventilated place after packaging.
EN
25