Factory Defaults - Horizon Hobby ARRMA 4x4 3S BLX Bedienungsanleitung

Factory Defaults

Binding
ON
Bind socket
Insert the Bind Plug in the Connect a fully charged battery Power on the ESC. The red
BIND port on the receiver. pack to the ESC. LED flashes, indicating the
receiver is in bind mode.
Center the ST TRIM and TH Power the transmitter on. The receiver LED will stop
TRIM dials on the transmitter. flashing.
OFF
Remove the Bind Plug, then Power off the transmitter.
power off the ESC to save the
settings.
WWW.ARRMA-RC.COM
18
www.modellmarkt24.ch