Ibiza sound PMM 8100 Bedienungsanleitung Seite 2

FEATURES AT A GLANCE
8 balanced microphone inputs, 8 high impedance microphone/line inputs and Tape/CD inputs. All may be used
simultaneously. Built-in Reverb with individual control on each channel, line out for connection to external amplifiers,
record out jack for taping performances, R.F interference protection on all inputs and outputs.
The built-in high-quality, high-effect MP3 player can play songs in MP3 format on a U disk. The blue backlit LCD
screen can display the total number of songs on the U disk, the total play time, the elapsed play time, the play / stop
sign, symbol cycle, as well as the EQ. Easy to operate MP3 player via five touch keys and LCD display.
SAFETY INSTRUCTIONS
CAUTION: To reduce the risk of electrical shock, do not remove the cover
(or back). No user serviceable parts inside; refer servicing to
qualified personnel.
WARNING: To reduce the risk of fire or electrical shock, do not expose this
appliance to rain or moisture.
This symbol, wherever it appears, alerts you to the presence of non-insulated dangerous voltage inside the
enclosure that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the
accompanying literature. Read the manual.
A. FROND PANEL SECTION FEATURES
1. BALANCED INPUT (MIC)
Electronically Balanced inputs accept a standard XLR male connector. It is designed to accept a balanced low
impedance input signal, Phantom power (15 volts) for condenser microphones is always on and available. It has an
input impedance of 1K ohm. The connector is wired as: Pin1=Ground/ shield; Pin2=hot (+); Pin3= cold (-).
2. BALANCED INPUT (LINE)
Electronically Balanced inputs accept a standard ¼" jack connector. They are designed to accept a balanced high
impedance input signal (for connection to a Deck, Turntable, Keyboard etc.).
©Copyright LOTRONIC 2011
GB
2