Seite 1
Aufbauanleitung / assembly instructions mod. 5868-5869 mit Frontauszug M10 x 635 24 x 8 17 x 8 13,8 x 43 M6 x 35 M8 x 55 M10 x 16 1. Montagematerial 2. Die Plattenträgerwanne in der Pappe umge- 1. fitting material dreht auf einen gepolsterten Untergrund (z.B.
Seite 2
8. Den Unterbau nun wenden und am Bestimm- 7. Fix the floor plate by 3 flat cover nuts. ungsort aufstellen. 8. Turn the table-base and position it where the table will be usded later. 2 / 6 5868-5869 mit Frontauszug Änderungsdatum: 04.03.16...
Seite 3
11. Mit je 7 Schrauben auf beiden Seiten fixieren. 12. Vier große Kunststoff-Unterlegscheiben über 11. Fix it with 7 screws on both sides. den Löchern positionieren. 12. Put 4 large plastic-washers over the holes. 3 / 6 5868-5869 mit Frontauszug Änderungsdatum: 04.03.16...
Seite 4
15. Beide Bremshebel lösen und... 16..den Auszug ausziehen und die Klapp- 15. Unlock both of the black braks and... einlage ausklappen. 16..draw out the extension. Swing out the wooden table extension. 4 / 6 5868-5869 mit Frontauszug Änderungsdatum: 04.03.16...
Seite 5
19. Den Auszug einklappen und den Tisch zu- sammenschieben. Die Schrauben der 4 äußeren Drehteile nun ganz festziehen. 19.Swing in the extension and push it back under the table. Tighten the 4 screws of the turning sockets tightly. 5 / 6 5868-5869 mit Frontauszug Änderungsdatum: 04.03.16...
Seite 6
20. Esstisch eingeschoben. 20. Table not extended. 21. Esstisch ausgezogen. 21. Extended table. 6 / 6 5868-5869 mit Frontauszug Änderungsdatum: 04.03.16...