Newpol XD900IXDG Bedienungs- Und Wartungshandbuch Seite 9

Refilling of rinse aid
The rinse aid, which is released automatically dur-
ing the final phase of the wash cycle, guarantees
that the dishes dry quickly and prevents the for-
mation of stains and calcium sediments.
Only use rinse aids for dishwashers. Other products won't obtain the desired
effect.
The rinse aid container S is located on the inside
of the door.
• Remove the container cap T by turning it 1/4 revo-
lution anticlockwise.
• Fill container with rinse aid up to the broken line.
Maximum quantity: about 140 ml.
• Put the cap back in its place.
• Clean off possible residues of rinse aid with a
cloth, otherwise too much foam might be pro-
duced during the rinsing process.
Indication of rinse aid level
• Electric (fig. 18-18.1)
The appliance is equipped with a level indicator
for the rinse aid. When it lights up, more rinse
aid needs to be added.
• Mechanical (fig. 9)
More rinse aid needs to be added when the
indicator (located on the container F) is clear (
When the container is full, the indicator has a dark
coloration.
Indication of salt level (if present)
7
The green mark under the cap indicates that there
is still enough salt in the container. If the green
mark is no longer visible, the salt container needs
to be refilled with special dishwasher salt.
).
T
S
F
1 2 3 4 5 6 7 8 9 0 1
1 2 3 4 5 6 7 8 9 0 1
1 2 3 4 5 6 7 8 9 0 1
1 2 3 4 5 6 7 8 9 0 1
1 2 3 4 5 6 7 8 9 0 1
1 2 3 4 5 6 7 8 9 0 1
8
9
7
GB