Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
INSTALLATION
5.1 LEVELLING
Place the appliance in the spot where you want to install it. Use feet P (unscrew or screw in) to regulate
(if necessary) the height of each foot to assure that the appliance is in a fully level position.
If the appliance is positioned in a level position, its correct functioning is assured.
Maximum error = 2 degrees
After levelling the appliance, regulate the hook of the door closing mechanism, to assure that the door
closes perfectly.
In order to obtain a perfect seal adjust the door locking device but only after having levelled the machine
in its final installation position.
5.2 WATER CONNECTION
The water supply tube C, which accompanies the
dishwasher, makes it possible to connect the appliance to
a faucet with a 3/4" attachment.
During the installation, the following instructions must be
followed:
• Attach tube C to the cold water faucet A.
• If the tube is being attached to new pipes that have not
been used for a long time, you should let the water run
for some time before attaching the tube in order to make
sure that dirt and rust residues are eliminated.
• Make sure that the water pressure corresponds to the
range indicated on the data tag.
The appliance may be connected to the cold water sys-
tem. It must not be connected to the hot water system.
1 2 3 4 5 6 7 8 9 0
4
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
GB
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
2
P
M
A
C
2.1
3
Werbung
Inhaltsverzeichnis
