Ferguson Regent i100s Bedienungsanleitung Seite 20

Manual Configuration
You can set the DHCP on or off, and enter the SSID as you known, or delete the connected WiFi.
Check network when power on
This is set to enable or disable "Check network when power on".
Date & Time
Currently Date & Time setting
You can press"↑" "↓"buttons for parameter setting, and move cursor with "←" "→"buttons and press
'Enter' to confirm.
Time Format setting
Time format setting: 12hours / 24hours
Date Format setting
Date format: YY/MM/DD, DD/MM/YY and MM/DD/YY
Daylight Saving Time（DST）
Daylight Saving Time setting: On / Off
GMT: Set the currently time as GMT
Alarm
1. Alarm Clock types（2 Alarm Clock setting）
You can select your favorite Alarm setting for every day, once or particular day in the week.
2. Alarm Clock（NAP function): If you would like to take a nap or need the Alarm in short time,
you can use this function. You can select the time from 5 minutes up to 120 minutes. No
Snooze function available for the NAP alarm.
3. Alarm Volume: You can set the alarm sound level.
Remark: The NAP Alarm is only beeping sound.
4. Alarm Sounds setting: Beep/Melody/Internet Radio
5. When the Alarm Clock goes on, press any key except for "Power" button, you can enter the
"Snooze" mode. You can press "Power" button to stop the ringing when the alarm goes on 5
minutes later again.
Remark: You can select any internet radio station or FM station as Alarm tone from the
favorite station. When the internet station doesn't work in 1 minute, it will auto set into Beep.
Timer
"←" "→"
Press or
time is due, it will release some beeping sound. Push down the Rotary knob to cancel.
Scheduled Playing
-Turn On: Option to set up a schedule to play any station from favorite station list.
-Turn Off: Turn off the schedule playing setting.
Language
There are 17 Languages available, such as English, German, French, Norwegian, Italian, Svenska,
Dansk and others. You can choose the one which is suitable for you.
Dimmer
You can adjust the backlight of the LCD with below settings:
1. Power Saving
You can set the backlight to dim down when there is no operation for a certain time of period. There
are 18 levels of the backlight available.
2. Turn on
You can adjust the backlight level for the operation mode, i.e. when you are operating the radio
or checking on the menu.
Display
You can choose the display show in color or Monochrome.
Power Management
This function is to allow the radio to go to Standby if there is no internet signal received in order to
save power. The default setting is Turn Off. If you set to 30 minutes, the radio will go into Standby
button to set the timer, then push down the Rotary knob to confirm. When the