Ferguson Regent i100s Bedienungsanleitung Seite 16

Connecting to your WiFi Network
The screen below will appear. You can choose "Yes" to proceed to search for the available WiFi
network. If your router has the WPS function, you can select the "Yes[WPS]" to proceed.
It will start scanning the network. After the search is done, it will display a list of the available routers.
Choose your router from the list, enter the WEP(Wired Equivalent Privacy) or WPA(Wi-Fi Protected
Access) code. If your network is not configured to be with the WEP or a WPA code, the unit will
connect to the router automatically.
Note: The encryption code would have been set up by the person who set up and
configured your network.
Please refer to the "Remote control character list" for you to enter the password.
Press the → button to go to the next word, press ← button to delete the wrong word you have
entered.
If you want to enter the password on the main radio unit, you can use the Volume Dial rotary knob.
Follow the steps below:
- Rotate the knob to select the character
- Press the button to go to the next entry
- After you finish the entries, push down the Rotary knob to confirm.
The radio will start connecting to the network.
01:01
Would you like to
configure Network now?
YESYes(WPS) NO
01:44
Linksys
Homeaudio
Demo
<
1/6
16:23
Enter Password
1/1
!MOVE"INPUT:#$OK8
>