LENCO Xemio-861 Bedienungsanleitung Seite 12

▪ To set the language, choose "Language", and then choose which
language as you desired by using </> and button.
e. Information:
You can view about the player information and Micro SD memory card status,
such as firmware version, remaining memory space available and the
number of support media files available in player.
▪ In Setup menu, choose "Information" by using </> and
appears to use.
▪ Choose "Player information" or "Disk space" which you want to view.
f. Factory Settings:
▪ In Setup menu, choose "Factory settings", a dialog "Restore factory
settings?" will pop up to confirm;
▪ Choose "Yes" to confirm. Or, "No" to abort.
▪ Press button to exit Setup menu.
G. Using the Bluetooth menu
To Turn On the Bluetooth Function:
● From the main menu, choose the Bluetooth function by using </> and
buttons, a Bluetooth sub menu appears.
Search and Pair Bluetooth device.
NOTE: Before pairing, please make sure your Bluetooth Receiver Device
supports the Bluetooth A2DP profile.
● Keep the device within a 1 meter range of your Bluetooth receiver device.
Power it On and set it into searching/pairing mode;
● Turn the BT On in "BT Control" menu.
● Then, in the Bluetooth list menu choose "Search Device" by using the </>
and buttons, the device will start searching for approximately 10 ~ 20
seconds. Devices found will be listed on the screen.
● Choose your device from the on screen list and choose "Pair/connect" by
using the </> and
paired and a Bluetooth icon " " will show on the display indicating the
Bluetooth connection is ok. If the connection is lost the color of the
Bluetooth symbol will change to grey.
● Choose "Folders & songs" in the Music menu list to directly select your
favorite music.
button. Wait a few seconds. Both devices should be
12
button, a list