Herunterladen Inhalt Inhalt Diese Seite drucken

Finish Vacuuming: If Vacuuming Started From The Base Station; Finish Vacuuming: If Vacuuming Started From Somewhere In The Room; Manually Controlled Vacuuming; Interrupting Vacuuming - Miele HS17 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für HS17:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Finish vacuuming: if vacuuming star‐
ted from the base station
The robot vacuum cleaner will return to
the base station automatically and re‐
charge.
The robot vacuum cleaner will return
to the base station and recharge even
when there is low battery capacity.
II will appear in the clock display. The
robot vacuum cleaner will then contin‐
ue vacuuming from the point at which
it was interrupted.
Finish vacuuming: if vacuuming star‐
ted from somewhere in the room
The robot vacuum cleaner will return to
its starting point and switch into stand‐
by.
The robot vacuum cleaner will stand
still when there is low battery capacity.
You should then recharge it.

Manually controlled vacuuming

You can use the direction buttons on
the remote control to vacuum a particu‐
lar area of the room.
 While the robot vacuum cleaner is va‐
cuuming, press and hold one of the
direction buttons.
The robot vacuum cleaner will turn in
the desired direction.
 Press and hold the + direction button.
The robot vacuum cleaner will travel in
the desired direction and continue to
vacuum.

Interrupting vacuuming

 Press the   button on the remote
control.
Press the button again to continue vac‐
uuming.
Manual navigation (without vacuum‐
ing)
You can use the direction buttons on
the remote control to direct the robot
vacuum cleaner to a specific area of the
room.
 Press and hold one of the direction
buttons.
The robot vacuum cleaner will travel in
the desired direction without vacuum‐
ing.
You cannot direct the robot vacuum
cleaner manually to the base station in
order to recharge it.
Directing the robot vacuum cleaner
to the base station
 Press the Base button on the remote
control.
en
45

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Scout rx1 sjql0

Inhaltsverzeichnis