Maintenance; Clean The Machine; Technical Data; Warranty - GreenWorks 1500107a Bedienungshandbuch

5

MAINTENANCE

CAUTION
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can cause
damage to the plastic, and make the plastic
unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
5.1

CLEAN THE MACHINE

CAUTION
The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with
a vacuum cleaner.
• Do not spray the air vent or put the air vent in
solvents.
• Clean the housing and the plastic components with
a moist and soft cloth.
6

TECHNICAL DATA

Voltage
No Load Speed
Blade diameter
Blade Arbor
Weight without battery
Cutting Depth at 0º
Cutting Depth at 45º
Battery model
Charger model
Measured sound pressure
level
Measured sound power
level
Vibration
English
24 V
4,300 RPM
165 mm
15.9 mm
3.45 kg
54 mm
41.3 mm
BAG701 / BAG702 /
29807 / 29837
29817
L = 87dB(A), K = 3
pA pA
dB(A)
L = 98 dB(A), K = 3
wA.d pA
dB(A)
2
a < 4.336 m/s , K = 1.5
k
2
m/s
7

WARRANTY

(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage) from
the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described in
the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
8 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Propellergatan 1, 211 15 Malmö, Swe-
den
Name and address of the person authorised to compile
the technical file:
Name: Peter Söderström
Address: Propellergatan 1, 211 15 Malmö, Swe-
den
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construc-
tion:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2011/65/EU & (EU)2015/863
• 2014/30/EU
• 2000/14/EG & 2005/88/EC
Furthermore, we declare that the following parts,
clauses of European harmonised standards have been
used:
7
Circular saw
1500107a
See product rating label
See product rating label
EN