Installation; Installing And Adjusting Camera - Eneo IEB-54F0028M0A Schnellinstallationsanleitung

Installation

Installation
For the operation of the Network Camera, it is necessary to connect a network cable for
data transmission, power connection from supplied power adapter.
The dome camera should be attached to a structural object, such as hard wood, wall stud
or ceiling rafter that supports the weight of the dome camera. For its fixation on different
locations, please consult with an installer.

Installing and Adjusting Camera

IEB-54F0028M0A
To mount the bullet camera, fix the base of the camera with the three screws provided in
the accessory kit.
6
Plastic anchor
Mounting screw