Bartscher Rimi Bedienungsanleitung Seite 28

Setting the temperature
•
The optimal temperature is factory-set. The temperature range for the cooler is
approx. 2° to 10° C.
•
To change the temperature, proceed as follows:
Press
To change the temperature, press
Press
If no other button is pressed within 10 seconds, the internal temperature will be
displayed on the LED display at the front of the device.
•
If you wish to change other factory settings, please contact our customer service
department for assistance.
Lighting
•
The device is equipped with 4 LED lights. They are located above each of
the 3 shelves, and one also under the device's upper shielding.
•
To turn the light on inside the device, hold the „
press again to turn the light off.
LED display
Compressor light:
The control light comes on when the device is cooling, goes off when the
cooler temperature is stable, and blinks when there is a delay in the cooling
process.
Defrost light:
The control light comes on during defrost, goes off after the device has been
defrosted, and blinks when there is a delay in the defrost process.
, and the temperature will be displayed.
to finish setting the internal temperature.
or .
" button for 1 second;
- 27 -