Operation - UltraMedia CarSat-55 Bedienungsanleitung

OPERATION

First start of the system
a) Make sure that the control unit is connected correctly.
b) Operate the toggle switch.
c) Press the standby button to switch on the device.
Switch on antenna
a) Press the [Power] button on the mini control unit, the red LED goes on and
the system starts to work.
b) The selected satellite is displayed on the mini control unit.
c) The satellite system starts automatically with the search for the selected
satellite.
d) The search can usually take 1-2 minutes.
e) After successful alignment, a television picture is displayed on the TV.
Switch off the antenna
a) To switch off the system and retract the antenna, press the power button on
the mini control unit.
b) The antenna is retracted fully automatically.
c) When the blue LED on the mini control unit goes out, the antenna is
completely closed.
d) To completely disconnect the device from the power, press the toggle switch
on the control device.
NOTE:
Objects such as trees, bridges and large houses that are at the satellite's angle of
incidence can interfere with the signal.
Heavy rain, clouds, snow or ice can reduce the reception quality.
If the satellite signal is lost, the TV picture freezes or disappears.
36